RENO PROFI HF DIMMABLE • SMD HF LED DIMMABLE LUMINAIRE • luminaire body: polycarbonate (PC) • suitable for illumination of indoor and outdoor spaces, high mechanical resistance • light output in standby mode (10/20%) includes adjustable microwave motion sensor adjustable via a DIP switch: – motion detection range – maximum light output time in the presence of people of 100% (Hold Time) – day/night settings (Daylight Sensor) – light output time in the absence of people 10/20% (STBY) – luminous flux adjustment for standby mode (STBY%) A) Detection Range • Sensor sensitivity setting (distance of movement activates the sensor within a 120° radius) • If DIP 1 is not switched, the sensor detection sensitivity is at the maximum of 100% (15 metres) • Switch the DIP to reduce the sensor detection sensitivity to 50 % B) Hold time • Setting the time the luminaire stays on at full power (10 seconds – 10 minutes) • If you do not switch DIPs 2 and 3, the transition time, when the luminaire does not detect movement, to the intermediate light stage is 10 seconds. If you do not activate the intermediate stage, the luminaire will be switched off. • If you switch DIP 2, the transition time, when the luminaire does not detect movement, to the intermediate light stage is 90 seconds. If you do not activate the intermediate stage, the luminaire will be switched off. • If you switch DIP 3, the transition time, when the luminaire does not detect movement, to the intermediate light stage is 3 minutes. If you do not activate the intermediate stage, the luminaire will be switched off. • By switching both DIP 2 and 3, the transition time, when the luminaire does not detect movement, to the intermediate light stage is 10 minutes. If you do not activate the intermediate stage, the luminaire will be switched off. C) Daylight Sensor • Sensor switching settings depending on the ambient lighting in the room (switches during the day – 5 Lux) • If you do not switch DIPs 4 and 5, the sensor detection sensitivity is at the maximum of • 2000 lx, which means that the luminaire switches on in daylight. • Switch DIP 4 to reduce the sensor detection sensitivity below 50 lx. The luminaire switches when the ambient light goes below 50 lux. • Switch DIP 5 to reduce the sensor detection sensitivity below 15 lx. The luminaire switches when the ambient light goes below 15 lux. • Switch both DIP 4 and 5 to reduce the sensor detection sensitivity to a minimum. The luminaire switches when the ambient light goes below 5 lux. D) STBY (Stand-by Period) • Setting the time the luminaire stays on in the DIM mode of the intermediate light stage (0 – infinity). • If you do not switch DIPs 6 and 7, the intermediate light mode (DIM mode) is not activated. The luminaire will switch off from full light output. The off time depends on the setting of DIPs 2 and 3. • After switching DIP 6, if the luminaire still does not detect movement for 30 seconds, the luminaire will switch off from the intermediate light mode. After switching DIP 7, if the luminaire still does not detect movement for 10 minutes, the luminaire will switch off from the intermediate light mode. • Switch both DIP 6 and 7 to set the time to infinite. The luminaire does not switch off from the intermediate light level, but remains lit. E) STBY% (Stand-by luminous flux %) • Adjusting the luminous flux of the luminaire in the DIM mode • If DIP 8 is not switched, the luminous flux of the luminaire in the DIM mode is 10%. • Switch DIP 8 to increase the luminous flux of the luminaire in the DIM mode to 20%. • The values mentioned above must always be considered with a certain degree of tolerance depending on the conditions of use